Maytag W10550279A Use & Care Manual page 11

f
8. Select cycle
heav_
duty
power_
sanitary
with Oxi
rinse/drain soak
&spin
norma[ cold
\\_owe|s
11/ _active
/I J _:_wear
hn_w h
ad as
clean washer
with_
Turn cycle knob to choose your wash
cycle. Estimated Time Remaining
will light up with a cycle time. You may
notice time adjusting during the cycle.
This is normal.
estimated time _emainin_
if you do not want to begin a cycle
immediately, you may choose DELAY START option.
To choose a delay time:
1. Press POWER/CANCEL
2. Select the desired Cycle, Modifiers, and Options. Delay Start is
not valid for Rinse/Drain & Spin cycle.
3. Press + (plus) DELAY START. 1H (one hour) will be displayed
in the time display window. The indicator light for Delay will
glow.
4. For a longer delay time, press DELAY START + (plus). For a
shorter delay time, press DELAY START - (minus). The Start
Time will increase or decrease by 1 -hour steps.
5. Press START/PAUSE. The countdown in hours and minutes
to the wash cycle will show in the time display window and
the indicator light will begin to flash.
NOTE: The Start/Pause indicator light will not flash when Delay
Start is chosen. You must press START/PAUSE to initiate a
countdown for the cycle to begin. The cycle selections and
modifiers are lit during the Delay Start time.
To cancel delaying a cycle:
Press POWER/CANCEL once to cancel Delay Start or press
START/PAUSE to cancel the countdown and start the cycle.
IMPORTANT: When delaying a cycle, use liquid HE detergent only
in the dispenser. Powdered detergents may absorb moisture from
a previous cycle and clump before the wash cycle begins.
9. Select cycle modifiers
modifiers
I eco
cold
! cold B cool R warm ! hot
auto temperature control
U no R low eemedium i max
spin extract
! light B medium II heavy m extra
heavy
Once you select a cycle, the default settings for that cycle will
be lit. Press the Modifier buttons to change the Wash Temp, Spin
Speed, and Soil Level, if desired. Not all settings are available
with all cycles.
NOTE: Always read and follow fabric care labels instructions
to avoid damage to your garments.
Wash Temp Suggested Fabrics
Hot
Some cold water is added to save Whites and pastels
energy, This may be cooler than your Durable garments
hot water setting, Heavy soils
Wa rm
Some cold water will be added, so Bright colors
this may be cooler than what your Moderate to light soils
previous washer provided.
Cool
Warm water is added to assist in Colors that bleed or fade
soil removal and to help dissolve Light soils
detergents
Cold
Warm water may be added to assist Dark colors that
in soil removal and to help dissolve bleed or fade
detergents Light soils
Eco Cold
This is the temperature from Dark colors that
your faucet bleed or fade
Light soils
1 O. Select cycle options
Select any other cycle options you may wish to add, if not
previously set. Some cycles will automatically add certain options
such as Clean Boost. These may be turned off, if desired.
NOTE: Not all options are available with all cycles.
11