About This Guide; Products Covered; Hp Procurve Product Naming - HP MSM7XX Reference Manual

Introduction

About this guide

About this guide
This guide explains how to work with the Command Line Interface (CLI) on HP ProCurve
Networking MSM7xx Controllers.

Products covered

This guide covers the following products:
Model
MSM710 Access Controller
MSM710 Mobility Controller
MSM730 Access Controller
MSM730 Mobility Controller
MSM750 Access Controller
MSM750 Mobility Controller
MSM760 Access Controller
MSM760 Mobility Controller
MSM765 Mobility Controller

HP ProCurve Product Naming

As of October 1st, 2008, Colubris Networks was acquired by HP ProCurve. HP ProCurve has
begun integrating the Colubris product line into the HP ProCurve Networking product
portfolio (www.procurve.com/news/colubris-10-01-08.htm).
In the online help and this manual, Colubris product names have been changed to their
equivalent HP ProCurve product names.
Note
SOAP and SNMP MIBs retain the Colubris naming so you do not need to change your existing
SOAP and MIB usage.
The Colubris Networks product names and their corresponding new HP ProCurve product
names are as follows:
Colubris name
MSC-5100 MultiService Controller
MSC-5200 MultiService Controller
MSC-5500 MultiService Controller
MAP-320 MultiService Access Point
1-2
Part
J9328A
J9325A
J9329A
J9326A
J9330A
J9327A
J9420A
J9421A
J9370A
HP ProCurve name
MSM710 Controller
MSM730 Controller
MSM750 Controller
MSM310 Access Point