Enable Context; Reboot Device; Show Certificate; Show Certificate Binding - HP MSM7XX Reference Manual

CLI commands

Enable context

Path: View > Enable
This context provides access to various utilities.

reboot device

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
reboot device
Restarts the system.

show certificate

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
show certificate
Display current certificates.

show certificate binding

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
show certificate binding
Display how the certificates are used.

iperf

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
iperf -c host [-t time]
Runs a performance throughput test.
Parameters
<-c host>
<-t length>

ping

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
ping <host> [-c <count>] [-s <length>] [-q]
Determines if the specified remote IP address is active.
Parameters
<-c host>
<-c count>
<-s length>
<-q>
2-4
The IP address or DNS name of the iperf server to connect to.
Length of the throughput test in seconds.
The IP address or DNS name of the host to ping.
Number of pings.
Length of the ping datagram.
Quiet mode. No output.