Soap-Server Access Port-1; Soap-Server Access Port-2; Soap-Server Allow; Soap-Server Http Authentication - HP MSM7XX Reference Manual

soap-server access port-1

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
soap-server access port-1
Enables SOAP access on the downstream port.
no soap-server access port-1
Blocks SOAP access on the downstream port.

soap-server access port-2

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
soap-server access port-2
Enables SOAP access on the upstream port.
no soap-server access port-2
Blocks SOAP access on the upstream port.

soap-server allow

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
soap-server allow <ip address>/<mask>
Adds a host to the list of IP address from which access to the SOAP interface is permitted.
no soap-server allow <ip address>/<mask>
Removes a host from the list of IP address from which access to the SOAP interface is permitted.
Parameters
IP address.
<address>
Subnet mask in CIDR format. Specifies the number of bits in the mask.
</mask>

soap-server http authentication

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
soap-server http authentication
Enable the SOAP server HTTP authentication.
no soap-server http authentication
Disable the SOAP server HTTP authentication.

soap-server http authentication password

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
soap-server http authentication password
Set the SOAP server HTTP authentication password.
CLI commands
2-29