Wireless Filters Mac; Wireless Filters Rule Input; Wireless Filters Rule Output - HP MSM7XX Reference Manual

Access controller; mobility controller
Hide thumbs Also See for MSM7XX:
Table of Contents

Advertisement

CLI commands

wireless filters mac

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
wireless filters mac <mac>
Sets the MAC address of the upstream device to send traffic to.
no wireless filters mac <mac>
Deletes the MAC address of the upstream device to send traffic to.

wireless filters rule input

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
wireless filters rule input <rule>
Adds a custom filter definition for incoming wireless traffic.
Use this command to define custom security filters for incoming wireless traffic. Filters are
specified using standard pcap syntax (http://www.tcpdump.org/tcpdump_man.html) with the
addition of a few -specific placeholders. These placeholders can be used to refer to specific MAC
addresses and are expanded by the service controller when the filter is activated. Once expanded,
the filter must respect the pcap syntax. The pcap syntax is documented in the tcpdump man page:
Placeholders
%a - MAC address of the access controller.
%b - MAC address of the bridge.
%g - Mac address of the default gateway assigned to the service controller.
%w - MAC address of wireless port.

wireless filters rule output

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
wireless filters rule output <rule>
Adds a custom filter definition for outgoing wireless traffic.
Use this command to define custom security filters for outgoing wireless traffic. Filters are
specified using standard pcap syntax (http://www.tcpdump.org/tcpdump_man.html) with the
addition of a few -specific placeholders. These placeholders can be used to refer to specific MAC
addresses and are expanded by the service controller when the filter is activated. Once expanded,
the filter must respect the pcap syntax. The pcap syntax is documented in the tcpdump man page:
Placeholders
%a - MAC address of the access controller.
%b - MAC address of the bridge.
%g - Mac address of the default gateway assigned to the service controller.
%w - MAC address of wireless port.
2-92

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents