Snmp-Server Contact; Snmp-Server Heartbeat Period; Snmp-Server Location; Snmp-Server Port - HP MSM7XX Reference Manual

CLI commands

snmp-server contact

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
snmp-server contact <email>
Specifies contact information.
no snmp-server contact
Deletes contact information.
Parameters
<email>

snmp-server heartbeat period

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
snmp-server heartbeat period <seconds>
Sets the interval between sending heartbeat traps.
Parameters
<seconds>

snmp-server location

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
snmp-server location <name>
Specifies the location where the service controller is installed.
no snmp-server location
Deletes location information.
Parameters
<name>

snmp-server port

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
snmp-server port <port number>
Sets the port the service controller will use to respond to SNMP requests.
Parameters
<port number>

snmp-server readonly

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
snmp-server readonly <community>
Sets the read-only community string.
no snmp-server readonly
Deletes the read-only community string.
2-24
Email address.
Heartbeat interval in seconds.
Location where the service controller is installed.
SNMP port number. Range 1 - 65535.