Ntp Server; Ntp Server Failure Trap; Config-Update Automatic; Config-Update Operation - HP MSM7XX Reference Manual

Rule of the form: The first [Weekday] on or after the [Day]th of [Month] at
<following-date>
[Time].
Rule of the form: The first [Weekday] on or before the [Day]th of [Month]
<preceding-date>
at [Time].

ntp server

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
ntp server <index><host>
Adds a network time server.
Parameters
Index of the time server in the list. Up to 20 time servers are supported.
<index>
Time servers are checked in the order that they appear in the list.
DNS name or IP address of the time server.
<host>

ntp server failure trap

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
ntp server failure trap
Send a trap each time a time server synchronization failed.
no ntp server failure trap
Do not send a trap each time a time server synchronization failed.

config-update automatic

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
config-update automatic
Enables scheduled configuration restore or backup.
no config-update automatic
Disables scheduled configuration restore or backup.
The service controller can automatically download the configuration file from a local or remote
URL (restore). It is also possible to upload the current configuration to a given URL (backup).
Theses operations can be done at preset times.

config-update operation

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
config-update operation (restore | backup)
Sets the type of operation that will take place at the preset time.

config-update time

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
config-update time <time>
Sets the time of day when the scheduled configuration operation (backup or restore) will take
place.
CLI commands
2-21