LAN interface context
Path: View > Enable > Config > LAN interface
This context provides commands for configuring LAN.
end
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
end
Switches to parent context.
duplex
Supported on: MSM710 MSM730 MSM750 MSM760
duplex (auto | half | full)
Sets the duplex mode on LAN.
Parameters
Lets the service controller automatically set duplex mode based on the
auto
type of equipment it is connected to.
Forces the port to operate in half duplex mode.
half
Forces the port to operate in full duplex mode.
full
speed
Supported on: MSM710 MSM730 MSM750 MSM760
speed (auto | 10 | 100)
Sets the speed of LAN.
Parameters
Lets the service controller automatically set port speed based on the type
auto
of equipment it is connected to.
Forces the port to operate at 100 mbps.
100
Forces the port to operate at 10 mbps.
10
interface vlan
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
interface vlan <id>[-<id2>]
Switches to the specified VLAN interface or create a new VLAN interface with the specified ID.
no interface vlan <id>[-<id2>]
Deletes the specified VLAN interface.
Parameters
VLAN ID. Range: 1 - 4094.
<id>
VLAN ID. When specified, is the last value in a range.
<id2>
CLI commands
2-77