Navigating To Waypoints (Waypoint List); Navigating To Ports, Port Services - Furuno GP-1850WD Operator's Manual

7. NAVIGATION
7.2 Navigating to Waypoints
(waypoint list)
1. Press the [WPT/RTE] key to open the
WAYPOINT & ROUTE menu.
2. Press the WAYPOINTS soft key to open
the WAYPOINTS menu.
3. Press the LOCAL LIST or
ALPHA/NUMERIC LIST soft key to show
corresponding waypoint list.
4. Select a waypoint.
5. Press the GO TO soft key. The plotter
display appears. A light-blue line runs
between destination selected and own
ship's position. Arrows on the line show
the direction to follow. Waypoint data
appear at the top of screen.
7-2
7.3 Navigating to Ports, Port
Services
TM
Some Nav-Charts and C-MAP chart cards
have a port service list which shows services
available at ports or harbors. (See page 2-5.)
You can use the list to set destination as
follows:
1. Press the [MENU] key to open the main
menu.
2. Press the DISPLAY OPTIONS soft key.
3. Press ▼ to select SET GO TO METHOD
and press the EDIT soft key.
4. Press the ▲ or ▼ to select WPT/PORT
SER and press the [ENTER] key or the
ENTER soft key.
5. Press the [PLOT] key to return to the
plotter display.
6. Press the GO TO soft key. Soft key titles
change as in the figure below.
40 45.971'N
+ FROM
13 57.462'E
OS
PUNTA CORNACCHIA
ACCO AMENO
ISCHIA PORTO
CASAMICCIOLA
I. ISCHIA
DGPS 3D
Plotter display
7. Press the PORT or NEAR SRVICE soft
key depending on objective. PORT
shows a list of ports in your area. NEAR
SRVICE displays the port service list.
SELECT PORT
ACCIAROLI
ACQUAMORTA
AGNONE S. NICOLA
AGROPOLI
AMALFI
BAIA
CAPRI
CASA MICCIOLA-ISCHIA
Sample port list (southern Italy)
GO TO
0.26 nm
180.2
QUICK
ROUTE
NEAR
SRVICE
PORT
CANCEL
GO TO