Furuno GP-1850WD Operator's Manual page 60

9. MEMORY CARD OPERATIONS
NOW LOADING DATA FROM
MEMORY CARD. DO NOT
TURN OFF THE POWER UNTIL
LOADING COMPLETE.
Load data message
After loading is completed, the following
message appears.
COMPLETE LOADING DATA.
PRESS "ENTER" KEY
TO CONTINUE.
Complete message
7. Press the [ENTER] key.
Notes on loading data
Track
Since loaded track data is added to internal
track, oldest track in the memory of the unit
will be deleted when the track memory
capacity is exceeded.
Waypoint/route
Waypoints/routes in the memory of the unit
are deleted to make room for loaded ones.
Mark/line
The loaded data is added to internal data.
When the mark/line memory becomes full,
no marks may be entered.
Configuration
The loaded data replaces current
configuration settings. Press the [ENTER]
key to restart. If the memory card is ejected
while loading, or data could not be loaded,
press the [ENTER] key to restart with default
settings. Note that the track memory
capacity setting is not saved or loaded.
9-4