Erasing Individual Waypoints - Furuno GP-1850WD Operator's Manual

5. WAYPOINTS
Entering waypoints by latitude and
longitude position
1. Press the [WPT/RTE] key to open the
WAYPOINT & ROUTE menu.
2. Press the WAYPOINTS soft key to open
the WAYPOINT menu.
3. Press the LOCAL LIST (lists waypoints in
order from nearest to furthest) or
ALPHA/NUMERIC LIST (lists waypoints
in alphanumeric order) soft key.
BRG.
FISH01
RNG. 1.75nm
ABCDEFGHIJKL
135 23.456' W
BRG.
WPT001
RNG. 2.51nm
12:30 29SE97
135 23.567' W
BRG.
ABCDEF
RNG. 5.07nm
15:21 01OCT97
135 54.321' W
BRG.
BRIDGE
RNG. 8.01nm
16:45 01OCT97
135 54.321' W
DGPS 3D
Local list
BRG.
ABCDEF
RNG. 5.07nm
15:21 01OCT97
135 54.321' W
BRG.
BRIDGE
RNG. 8.01nm
16:45 01OCT97
135 54.321' W
BRG.
FISH01
RNG. 1.75nm
ABCDEFGHIJKL
135 23.456' W
BRG.
WPT001
RNG. 2.51nm
12:30 29SE97
135 23.567' W
DGPS 3D
SEARCH FOR
Alphanumeric list
4. Press the NEW WPT soft key to show the
waypoint window. Own ship's position is
shown. Change the data similar to how
you did in "Entering waypoints by the
cursor."
5. Press the SAVE soft key.
5-4
WPT
23.8
LOCAL
33 12.345' N
GO TO
90.0
NEW
33 23.456' N
WPT
EDIT
180.0
WPT
34 12.345' N
ERASE
359.9 WPT
34 12.345' N
RETURN
WPT
180.0
ALPHA
34 12.345' N
GO TO
359.9
NEW
34 12.345' N
WPT
EDIT
23.8
WPT
33 12.345' N
ERASE
90.0 WPT
33 23.456' N
RETURN
_ _ _
Search window
5.2 Erasing Individual
Waypoints
Individual waypoints can be erased by the
cursor or through the waypoint list.
Erasing waypoints by the cursor
1. Press the cursor pad to turn on the
cursor.
2. Operate the cursor pad to place the
cursor on the waypoint you want to erase.
A flashing diamond mark appears over
the waypoint when it is correctly selected.
3. Press the [CLEAR] key. You are asked if
you are sure to erase the waypoint.
4. Press the [ENTER] key. The waypoint is
erased from both the plotter screen and
the waypoint list.
Erasing waypoints through the
waypoint list
1. Press the [WPT/RTE] key to open the
WAYPOINT & ROUTE menu.
2. Press the WAYPOINTS soft key to open
the WAYPOINTS menu.
3. Press the LOCAL LIST or
ALPHA/NUMERIC LIST soft key.
4. Press ▲ or ▼ to select the waypoint you
want to erase.
5. Press the ERASE WPT soft key. You are
asked if you are sure to erase the
waypoint.
6. Press the [ENTER] key. The waypoint is
erased from both the waypoint list and
the plotter screen.