Alarm Information - Furuno GP-1850WD Operator's Manual

8. PLOTTER ALARMS
8.8

Alarm Information

When an alarm setting has been violated the
buzzer sounds and the speaker icon (shown
in red) appears. You can see which alarm
has been violated, as well as silence the
buzzer, on the alarm menu display.
1. Press the [ALARM] key.
ON
AUDIO ALARM
ON 0.100nm
ARRIVAL ALARM
ON 0.050nm
ANCHOR ALARM
ON
PROXMTY ALARM
ON 0.100nm
XTE ALARM
OVER/UNDER
SPEED ALARM
12.5 ~ 15.0kt
ALARM INFORMATION
YOU HAVE ARRIVED AT
WAYPOINT : SP-001.
DGPS 3D
Alarm information
(Example: Arrival alarm)
Alarm menu
2. Press the CLEAR ALARM soft key to
silence the buzzer. The color of the alarm
message and the speaker icon changes
from red to black.
Note: The speaker icon is displayed in red
until all alarms have been
acknowledged on the alarm menu
display. If more than one alarm has
been violated the message
CONTINUE appears at the bottom of
the display. In this case press the
NEXT INFO soft key to see which
other alarms have been violated.
8-4
Alarm messages
Alarm messages and their meanings
YOU HAVE ARRIVED
AT WAYPOINT.
YOU HAVE EXCEEDED
ANCHOR WATCH
LIMIT.
YOU HAVE ENTERED
AN AVOIDANCE AREA.
ALARM
YOU HAVE EXCEEDED
EDIT
XTE LIMIT.
YOU HAVE EXCEEDED
SPEED ALARM LIMIT.
CLEAR
ALARM
Message
Arrival alarm setting
violated.
Anchor watch alarm
setting violated.
Proximity alarm
setting violated.
XTE alarm setting
violated.
Speed alarm setting
violated.
Meaning