Advertisement
Quick Links
Download this manual
See also:
Installation Manual
COLOR DGPS/PLOTTER/SOUNDER GP-1850DF
COLOR GPS/PLOTTER/SOUNDER GP-1850F
The purpose of this operator's guide is to provide the basic operating procedures for this equipment.
For detailed information, refer to the operator's manual.
Turning the Power On/Off
Press and hold down the [POWER/BRILL]
switch.
Adjusting Tone and
Brilliance
1. Press the [POWER/BRILL] key with a touch-
and-release action.
2. Press the appropriate soft key or cursor pad
to adjust.
PLOTTER
Course bar
Current display mode
Nav information
window
34 12.345' N
135 12.345' E
002WP
FISH
DGPS 3D
Icon (alarm)
GPS status
Waypoint name
Waypoint mark
Typical indications on the plotter display
Operator's Guide
Functions for
soft key
(north-up)
Track
NORTH
CSE
245.8
16.3kt
UP
SPD
ZOOM
IN
ZOOM
OUT
COURSE
UP
BRIDGE
NAV
WPT
Own ship
mark
Displaying Electronic
Chart at Power Up
Insert mini chart card in slot and turn on the
power.
Selecting Nav Data
Displays
Press the soft key NAV L/L (WPT, S/C).
Changing Chart Scale
Press the soft key [ZOOM IN] to enlarge;
[ZOOM OUT] to shrink.
Turning the Cursor On/Off
Cursor On: Operate the cursor pad.
Cursor Off: Press the soft key [CENTER].
Shifting the Cursor
Operate the cursor pad.
Shifting the Display
Press and hold down the cursor pad.
Advertisement
Related Manuals for Furuno GP-1850DF
Summary of Contents for Furuno GP-1850DF
-
Page 1: Adjusting Tone And Brilliance
COLOR DGPS/PLOTTER/SOUNDER GP-1850DF COLOR GPS/PLOTTER/SOUNDER GP-1850F Operator’s Guide The purpose of this operator's guide is to provide the basic operating procedures for this equipment. For detailed information, refer to the operator's manual. Turning the Power On/Off Displaying Electronic Chart at Power Up Press and hold down the [POWER/BRILL] switch. -
Page 2: Entering Waypoints At Own Ship Position
Returning Own Ship to Stopping, Restarting Screen Center Recording of Track Press the soft key CENTER. 1. Press the [MENU] key. 2. Press the soft key CHART SETUP OP- TIONS. Changing the Plot Interval 3. Press the soft key TRACK CONTROL. 4. -
Page 3: Cancelling Destination
SOUNDER Setting Destination by Functions for Waypoint Number soft key Variable Range Marker Nav information 1. Place the cursor on the waypoint you want (White) window Depth scale to go on the plotter display. 34 12.345’ N 245.8 SOUNDER 135 12.345’ E 16.3kt 2. -
Page 4: Manual Sounder Operation
Manual Sounder Suppressing Low Level Operation Noise 1. On the normal or dual-frequency display, 1. Press the [MENU] key, and then press the press the soft key MODE/FREQ. When the soft key SOUNDER SETUP OPTIONS to plotter/sounder display is displayed, press the show the sounder setup menu.