Navigating To Waypoints (Waypoint List); Navigating To Ports, Port Services - Furuno GP-1650 Operator's Manual

7.2 Navigating to Waypoints
(waypoint list)
1. Press the [WPT/RTE] key to open the
waypoint & route menu.
2. Press the soft key WAYPOINTS to open
the waypoint menu.
3. Press the soft key LOCAL LIST or ALPHA/
NUMERIC LIST to show corresponding
waypoint list.
4. Select a waypoint.
5. Press the soft key GO TO. The plotter dis-
play appears. A light-blue line runs be-
tween destination selected and own ship's
position. Arrows on the line show the di-
rection to the follow. Waypoint data ap-
pear at the top of screen.
7.3 Navigating to Ports, Port
Services
Some Nav-Charts™ mini chart cards have a
port service list which shows services avail-
able at ports or harbors. (See page 2-4.) You
can use the list to set destination as follows:
1. Press the [MENU] key to open the main
menu.
2. Press the soft key DISPLAY OPTIONS.
3. Press to select SET GO TO METHOD
and press the soft key EDIT. The SET GO
TO METHOD window appears.
4. Press the or
SER and press the [ENTER] key or the
soft key ENTER.
5. Press the [PLOT] key to return to the plot-
ter display.
6. Press the soft key GO TO. Soft key titles
change as in Figure 7-2.
7-2
to select WPT/PORT
40 45.971'N
+
13 57.462'E
PUNTA CORNACCHIA
ACCO AMENO
ISCHIA PORTO
CASAMICCIOLA
I. ISCHIA
DGPS 3D
Figure 7-2 Plotter display
7. Press the soft key PORT or NEAR
SRVICE soft key depending on objective.
PORT shows a list of ports in your area.
NEAR SRVICE displays the port service
list.
SELECT PORT
ACCIAROLI
s
ACQUAMORTA
AGNONE S. NICOLA
AGROPOLI
AMALFI
BAIA
CAPRI
CASA MICCIOLA-ISCHIA
Figure 7-3 Sample port list (southern Italy)
SELECT PORT
SERVICE
'
™
™
™
Figure 7-4 Sample port service list
GO TO
FROM 0.26 nm
OS 180.2
QUICK
ROUTE
NEAR
SRVICE
PORT
CANCEL
GO TO
™
™
™
™