Customizing Your Unit; Chart Setup Options Menu - Furuno GP-1850WD Operator's Manual

10. CUSTOMIZING YOUR UNIT

This section describes the various options
which allow you to set up your unit to suit
your needs.
10.1 CHART SETUP
OPTIONS menu
The chart offset options menu provides three
menus: chart offset, track control, and chart
details.
1. Press the [MENU] key to open the main
menu.
2. Press the CHART SETUP OPTIONS soft
key.
CHART OFFSET
TRACK CONTROL
CHART DETAILS
DGPS 3D

Chart setup options menu

CHART OFFSET menu
In some instances position may be off by a
few minutes. For example, the position of the
ship is shown to be at sea while it is in fact
moored at a pier. You can compensate for
this error by offsetting chart position as
follows:
1. Press the [MENU] key followed by the
CHART
SETUP
2. Use the cursor pad to place the cursor
RETURN
3. Press the SET OFFSET soft key.
4. Press the RETURN soft key to finish.
To cancel chart offset, press the RESET
OFFSET soft key at step 3 in the above
procedure.
TRACK CONTROL menu
This menu mainly controls track color and
track plotting interval. For further details see
Chapter 3.
CHART SETUP OPTIONS and CHART
OFFSET soft keys.
FROM
34 12.345' N
135 12.345' E
OS
DGPS 3D
Plotter display, chart offset selected
where to offset chart position.
CHART
16.41 nm
276.9
OFFSET
ZOOM
IN
ZOOM
OUT
SET
OFFSET
RESET
OFFSET
RETURN
10-1