Man Overboard (Mob); How To Mark Mob Position; How To Stop Navigating To A Mob Mark; How To Erase An Mob Mark - Furuno GP-1670F Operator's Manual

1. OPERATIONAL OVERVIEW
Item Context-sensitive menu
Screen-
SAVE
shots (IN-
DELETE
TERNAL)
RENAME
PREVIEW
Screen-
LOAD
shots (SD
DELETE
CARD)
RENAME
PREVIEW
1.15

Man Overboard (MOB)

The MOB mark denotes man overboard position. Enter the mark when someone falls
overboard, to automatically create a route to the man overboard position. Only one
mark can be displayed.
1.15.1

How to mark MOB position

Long-push the EVENT/MOB key on any screen. The plotter display appears if you are
using a different screen. The MOB mark is put at the latitude and longitude position of
your boat at the moment the key is pressed. The [MOB] box at the bottom left of the
screen shows the bearing and range to the MOB mark.
MOB mark
1.15.2

How to stop navigating to a MOB mark

Put the cursor on the MOB mark then press the ENT key. "STOP" appears at the bot-
tom left corner. Press the ENT key to stop navigation. The message "Stop navigating
to MOB. Are you sure?" appears. [YES] is selected; press the ENT key.
1.15.3

How to erase an MOB mark

Put the cursor on the mark then press the ENT key to show the context-sensitive
menu. Select [DELETE] then press the ENT key. The message "Delete MOB. Are you
sure?" appears. [YES] is selected; press the ENT key. (The MOB mark set as desti-
nation cannot be erased. You must cancel navigation to the mark before you can
erase it.)
1.16

How to Take a Screenshot

You can take a screenshot at any time and save it to the internal memory, in PNG for-
mat. Open the full RotoKey menu then select [Screenshot]. For how to process
screenshots, see section 9.8.
1-24
[SAVE]: Copy the screenshots in the internal
memory to the SD card.
[DELETE]: Delete the screenshots.
[RENAME]: Give the file a new name.
[PREVIEW]: Show the screenshots selected on
the screen.
[LOAD]: Copy the screenshots in the SD card to
the internal memory.
[DELETE]: Delete the screenshots.
[RENAME]: Give the file a new name.
[PREVIEW]: Show the screenshots selected on
the screen.
MOB
Bearing to MOB position
180°T
14.2 NM
Range to MOB position
MOB box
Description