Inserting, Removing Waypoints - Furuno GP-1850WD Operator's Manual

6.3 Inserting, Removing
Waypoints
Inserting waypoints through the route
list
Waypoints can be inserted in routes as
follows:
1. Press the [WPT/RTE] key followed by the
ROUTES soft key to open the ROUTE
menu.
2. Select a route by pressing ▲ or ▼.
3. Press the EDIT ROUTE soft key. The
route name screen appears.
4. Press the LOCAL LIST soft key. All
waypoints in the route are displayed.
ROUTE NAME: ABCDEF
COMMENT: ABCDEFGHIJKL
01
34 .12.345'N
WPT001
135 .54.321'W
02
34 .23.456'N
WPT002
136 .10.255'W
03
35 .11.222'N
WPT003
136 .55.889'W
04
35 .22.878'N
WPT004
136 .44.333'W
05
34 .15.279'N
WPT005
135 .34.111'W
DGPS 3D
Edit route menu
5. Press ▲ or ▼ to place the cursor at the
location where you want to insert a
waypoint.
6. Press the INSERT WPT soft key to show
the waypoint list.
ROUTE NAME: ABCDEF
COMMENT: ABCDEFGHIJKL
01
34 .12.345'N
WPT001 LOCAL LIST
135 .54.321'W
02
34 .23.456'N
001
WPT002
100136 .10.255'W
03
35 .11.222'N
002
WPT003
136 .55.889'W
04
35 .22.878'N
003
WPT004
136 .44.333'W
05
34 .15.279'N
004
WPT005
135 .34.111'W
DGPS 3D
Waypoint list for editing a route (Local list)
EDIT
ROUTE
LEG
INSERT
204.8
WPT
33.83nm
REMOVE
22.0
WPT
34.27nm
CHANGE
WPT
35.1
2.89nm
COORD
125.6
TYPE
31.25nm
RETURN
RETURN
EDIT
ROUTE
LEG
SELECT
204.8
WPT
33.83nm
WPT010
COORD
22.0
TYPE
34.27nm
WPT011
LOCAL
LIST
35.1
2.89nm
WPT012
ALPH
125.6
LIST
WPT013
31.25nm
RETURN
CANCEL
7. Press ▲ or ▼ to select the waypoint you
want to insert. You can switch between
the local list and alphanumeric list by
pressing the LOCAL LIST or ALPH LIST
soft key.
8. Press the SELECT WPT soft key.
Changing waypoints through the list
Waypoints used in a route can be changed
with others.
1. Press the [WPT/RTE] key followed by the
ROUTES soft key to open the ROUTE
menu.
2. Select a route by pressing ▲ or ▼.
3. Press the EDIT ROUTE soft key. The
route name screen appears.
4. Press the LOCAL LIST soft key.
5. Select the waypoint which you want to
change (remove).
6. Press the CHANGE WPT soft key to
show the local list.
7. Select the waypoint which you want to
change (insert).
8. Press the CHANGE WPT soft key to
change the waypoint.
9. Press the [PLOT] key.
6. ROUTES
6-3