Advertisement
Assembling The Cabinet Doors
1. Install Door Stops to Bottom Shelf and Top
Panel of Cabinet. See Fig. 4. Secure firmly
using 4 of the 1/4"x1/2" Phillips head screws
and nuts.
2. Remove the white protective film from the
stainless steel Doors. Attach a Door Handle to
each Front Door by using 2 of the M4x6mm
Phillips head screws provided. See Fig. 5. Be
careful not to scratch the door surfaces.
3. When installing the Front Doors, make sure
the door bolt holes are located on the hinge
sides of the Cart Legs.
4. Install either Front Door by inserting 1/4"x5/8"
part-threaded bolt through the lower door bolt
hole of the Front Door and into the tapped
hole of the Bottom Shelf. Tighten securely.
Next, align the upper door bolt hole of Front
Door with the tapped hole in the Top Panel of
Cabinet. Insert 1/4"x5/8" part-threaded bolt
provided and tighten securely.
5. Repeat these steps to install the other Front Door.
How To Level The Grill Cart So The Doors Line-Up
When the top edge of the cabinetdoors do not line-
up your gdll cart needs to be leveled. This step is
often required after initialassembly and when your
grillhas been moved to a new location. To level
your grillcart, use an 11/16" open-end wrench to
unscrewthe Castors counter-clockwisefrom their
Castor Seats (see bottomof the Cart Legs) until
the cabinet doors are aligned. See Fig. 5.
Figure 4
TOP PANEL
• OF CABINET
/
.,.J..
/
f
DOOR STO D
Found in
SHELF
Figure 5
UPPER DOOR
ZL\
TAPPED
HOLE
.':_ >
,-
j,
Advertisement
