Advertisement
Warranty .....................................................
2
Safety Instructions
.....................................
2
Pre-Assembly
Instructions
.........................
4
Parts
Diagram
and Part
Lists ............... 5
Assembly Instructions .................................
8
Lighting Instructions
..................................
14
Cooking
Instructions
................................
16
Cleaning and Maintenance
Instructions
.... 16
Frequently
Asked
Questions .................. 19
Cooking
Guide
and Recipes ................ 20
/_ WARNING
Failure to comply with these instructions
could result in a fire or explosion which
could cause serious bodily injury, death,
or property damage.
Grill Installation Codes
This gas grill must be installed in accordance
with all local codes. In areas without local
codes, follow the latest edition of the National
Fuel Gas Code ANSI Z223.1. In Canada. installa-
tion must conform to standard CAN/CGA lb149.1
or 1-b149.2 (Installation Code for Gas Burning
Appliances and Equipment) and all local codes.
From the date of purchase for the designated time
periods listed below, Sears will replace the following
grillparts free of charge if they are defective in material
or workmanship.
• Lifetime of Grill: Exterior Stainless Steel Parts,
Aluminum Castings (except for paint loss)
• 3 Years: Flame Tamers, Cooking Grids, Burners
• 5 Years: All Other Grill Parts (except ignitor battery)
This warranty does not cover:
• Labor costs for repairs
• Grill if it is used for commercial or rental
purposes.
Replacement parts are available by contacting the
nearest Sears Service Center.
This warranty applies only when the grill is used
in the United States.
This warranty gives you specific legal rights, and
you may also have other rights which vary from
state to state.
Sears, Roebuck and Co., Dept. 817WA,
Hoffman Estates, IL 60179
Proper Placement and Clearance of Grill
Never use your gas grill in a garage, porch,shed,
breezeway or any other enclosed area. Your gas grill
is to be used outdoors only, at least 24" from the
back and side of any combustible surface. Your
gas grillshould not be placed under any surface
that will bum. Do not obstruct theflow of ventila-
tion air around the gas gdll housing.
This outdoor gas grillis not intendedto be installedin
or on recreational vehicles and/or beats.
Correct LPG Cylinder Use
LPG grill models are designed for use with a
standard 20 lb. Liquid Propane Gas (LPG)
cylinder, not included with grill box. Never
connect your gas grill to an LPG cylinder that
exceeds this capacity. A cylinder of approxi-
mately 12 inches in diameter by 18-1/2 inches
high should be the maximum size LPG cylinder
used. We recommend buying an "OPD" gas
cylinder which offers an Overfill Prevention
Device. This safety feature prevents the cylinder
from being overfilled which can cause malfunction
of the LPG cylinder, regulator and/or grill.
The LPG cylinder must be constructed and
marked in accordance with specifications of the
U.S. Dept. of Transportation (DOT). In Canada,
the LPG cylinder must meet the Canadian
Transportation and Communications (CTC)
specifications. Also be sure:
1. The LPG cylinder has a shutoff valve, termi-
nating in an LPG supply cylinder valve outlet,
that is compatible with a Type 1 cylinder
connection device. The LPG cylinder must
also have a safety relief device that has a
direct communication
with the vapor space of
the cylinder.
2. The cylinder supply system must be arranged
for vapor withdrawal.
3. The LPG cylinder used must have a collar
to protect the cylinder valve.
2
© Sears, Roebuck and Co.
Advertisement
