Zipper Sewing - Sears Kenmore 385.17628 Owner's Manual

Zipper Sewing (Continued)
[] _') Wrong side of fabric
(_ Slider
(_) 2" (5cm)
Stop just before the zipper foot reaches the slider
on the zipper tape about 2" (5 cm) from the top of
the zipper,
Lower the needle slightly into the fabric, raise the
foot,
Open the zipper to move the slider (_ behind
the zipper foot°
Lower the foot and stitch the remainder of the
seam, making sure the fold is even,
[] (_) Wrong side of fabri
Close the zipper and spread the fabric flat with
the right side ® facing up,
[]
Move the zipper foot to the left pin.
Guide the edge of the foot along the zipper teeth
(_ and stitch through the garment and zipper
tape°
Remove the basting stitches along the zipper
opening.
[]
r•
f
[]
®
®
[]
Stop at about 2 ° (5 cm) from the top of the zipper..
Lower the needle slightly into the fabric, raise the
foot.
Open the zipper to move the slider (_ behind the
zipper foot.
Lower the foot and stitch the remainder of the
seam, making sure the fold is even°
®
®
44