Cleaning The Bobbin Holder - Sears Kenmore 385.17628 Owner's Manual

NOTE:
.4: Unplug the machine.
-4.. D o not dismantle the machine other than as
explained in this section,,
* Do not store the machine in a high-humidity area,
near a heat radiator or in direct sunlight°
* Clean the outside of the machine with a soft cloth
and mild soap,,
Replacing the Light Bulb
CAUTION= As the light bulb could be HOT, protect
your fingers when you handle it.
Unplug the machine and open the face cover. Push
the bulb up and turn it counterclockwise to remove.
Put in a new bulb by pushing it up and turning it
clockwise.
Cleaning the Bobbin Holder
To insure that the machine operates at its best, you
need to keep the essential parts clean at all times.
Cot]ect dust and lint from the bobbin area. The
machine can become sluggish or knock loudly when
a thread is caught,,
Turn off the power switch and unplug the machine°
Remove the hook cover plate by sliding the hook
cover plate reIease button to the right.
\ ..................................
Take out the bobbin. Brush out dust and lint with a
lint brush or a vacuum cleaner,.
Insert the bobbin and attach the hook cover plate,
f
\"-t,
94