Sears Kenmore 385.17628 Owner's Manual page 100

Twin Needle Stitches (Optional Item)
(i) Stitch width: _f
_) Stitch length: Gold stretch stitch position
or green zone
(_) Needle thread tension: 3 to 7
O Presser foot A: Zigzag foot
(_) Presser foot F: Satin stitch foot
Needle: Twin needle (optional item)
®
® or ® ®
(_ Upper thread guide
(_) Check spring holder
(_) Thread take-up lever
(_ Needle bar thread guide
(_) Twin needle
Turn off the power switch. Insert an additional spool
pin in the hole for the additional spool pin. Place a
piece of felt and a spool on the additional spool pin.
Prepare the needle thread for the additional spool pin.
For threading of twin needle sewing, follow the chart
making sure you separate two threads, placing one
in each thread guide on the side of the needle bar (_)_
Change the needle to a twin needle ®. Thread each
needle from front to back°
NOTE:
To change the direction of sewing, turn the
handwheel to make the needle be in the up
position° Do not use a stitch width over the
twin needle sewing zone ( # ).
92