Automatic Buttonhole - Sears Kenmore 385.17628 Owner's Manual

i/vJ'/m ia"{ua'ua K_o) _i: [e]iq =lp'._'1 _inpknLvAvti _| _I_ _ _]a_ at l_: !_
Automatic Buttonhole
(D Stitch width:
(_) Stitch length:
(_) Needle thread tension:
(_ Presser foot R:
3 to 6,5
Blue zone
2to6
Automatic buttonhole foot
_ WIDTH (_
_ LENGTH (_
®
• Preparation for Sewing
(_ Groove
(_ Pin
Attach the automatic buttonhoIe foot R.
Make sure the groove on the holder catches the pin on
the foot when lowering the presser foot,,
a TO Sew
(D Button holder
(_) Buttonhole lever
The buttonhole size is automatically set by placing the
button in the rear of the automatic buttonhole foot.
The button holder on the foot takes a button up to 1
(2.5 cm) in diameter.
Make a test buttonhole on an extra piece of the fabric
to check your settings.
Use interfacing on stretch fabrics,,
Pull the button holder (_) to the back, and place the
button in it. Push it together tightly on the button.
Pull the buttonhole lever 0 down as far as it will go,
, , J
74