Avaya 4600 Series Installation Manual page 47

3. While either the application file is uncompressed into RAM, the following message is
displayed:
Loading
....************
Since this takes a while, asterisks, then periods, then asterisks are displayed on the second
line to indicate that something is happening.
4. When control is passed to the code in RAM, the following message is displayed:
Starting...
5. The telephone detects and displays the speed of the Ethernet interface in Mbps (that is, 0, 10
or 100). The message No Ethernet is displayed until the software determines whether the
interface is 10 Mbps or 100 Mbps.
The Ethernet speed indicated is the LAN interface speed for both the telephone and
any attached PC.
6. The software checks whether sufficient IP address information has been downloaded. In this
scenario, it is discovered that sufficient information has not been downloaded. The following
message is displayed while the DHCP process is invoked:
DHCP: 0 secs
* to program
The number of elapsed seconds is incremented once per second, until DHCP successfully
completes.
7. The following message is displayed while the TFTP process is invoked:
TFTP: ping 1
www.xxx.yyy.zzz
The number of pings is incremented once per second, until the TFTP server responds.
8. The following message is displayed while the upgrade script is downloaded from the TFTP
server:
46XXUPGRADE.SCR
n KB received
where n is the number of KBs that have been downloaded.
9. The script file is processed and the software determines that the name of the boot code file in
the telephone (BOOTNAME) is the latest version, and the name of the application file in the
telephone is the same as APPNAME.
10. System-specific registration with the DEFINITY server is invoked.
11. Upon completion of registration, dial-tone is available on the telephone.
Scenarios for the Restart Process
Appendix
A-7