Boot File Needs To Be Upgraded - Avaya 4600 Series Installation Manual

4600 Series IP Telephone Installation Guide
If this condition applies

Boot file Needs to be Upgraded

Latest Boot File Loaded/No Application File or Application File Needs to be
Upgraded
Latest Boot File and System-Specific Application File Already Loaded
Boot file Needs to be Upgraded
This should almost never happen.
1. The following message is displayed:
Restarting...
2. While the hardware is being initialized, the following message is displayed:
Initializing
3. While either the application file (if there is one) or the boot code is uncompressed into RAM,
the following message is displayed:
Loading
....************
Since this takes a while, asterisks, then periods, then asterisks are displayed on the second
line to indicate that something is happening.
4. When control is passed to the software that was just loaded, the following message is
displayed:
Starting...
5. The telephone detects and displays the speed of the Ethernet interface in Mbps (that is, 0, 10
or 100). The message No Ethernet is displayed until the software determines whether the
interface is 10 Mbps or 100 Mbps.
The Ethernet speed indicated is the LAN interface speed for both the telephone and
any attached PC.
Scenarios for the Restart Process
A-2
See
page A-2
page A-5
page A-6
4