Removing The Chassis Fan - Dell Vostro 220s Service Manual

Back to Contents Page
Fan
Dell™ Vostro™ 420/220/220s Service Manual

Removing the Chassis Fan

Replacing the Chassis Fan
CAUTION: Before working inside your computer, read the safety information that shipped with your
computer. For additional safety best practices information, see the Regulatory Compliance Homepage at
www.dell.com/regulatory_compliance.
CAUTION: To guard against likelihood of electric shock, laceration from moving fan blades, or other
unexpected injuries, always unplug your computer from the electrical outlet before removing the cover.
NOTICE: The procedure for removing and replacing the chassis fan is identical (except where noted0 for
the Vostro 420, Vostro 220, and Vostro 220s computers; the illustrations provided are for example only
and may not represent your particular computer precisely.
Removing the Chassis Fan
1. Follow the procedures in
2. Remove the computer cover (see
3. Disconnect the chassis fan cable from the system board.
4. While holding the chassis fan in place, remove the screw(s) that secure(s) the fan to the chassis.
5. For the Vostro 220s, slide the fan toward the front of the computer to disengage it from the chassis.
6. Ease the fan toward the center of the computer, and lift the fan out of the chassis.
Vostro 420
Before Working on Your
Removing the Computer
Computer.
Cover).