Dell Vostro 220s Service Manual page 58

1. Route the I/O panel cables into the chassis through the I/O panel opening, and guide them through the various holes
and bays.
2. Slide the I/O panel cables into the cable clip(s) (if present).
3. Replace and tighten the screw that secures the I/O panel.
4. Reconnect the cables to the system board (see
5. For the Vostro 220s:
a. Replace the chassis support bracket (see
b. Replace any hard drives in the hard drive cage (see
5 of Removing the I/O
6. Follow the procedure in
Back to Contents Page
System Board
Replacing the Chassis Support
Panel.
After Working on Your Computer.
Components).
Bracket).
Replacing or Adding a Hard Drive) that you removed in step