System Setup Program Options - Dell Vostro 220s Service Manual

Options List — This field appears on the left side of the system setup
program window. The field is a scrollable list containing features that define
the configuration of your computer, including installed hardware, power
conservation, and security features.
Scroll up and down the list with the up- and down-arrow keys. As an option
is highlighted, the Option Field displays more information about that option
and the option's current and available settings.

System Setup Program Options

NOTE: Depending on your computer and installed devices, the items listed in this section may not appear, or may not
appear exactly as listed.
System Info
Lists system information such as the computer name, and other system-specific information.
System Info
Shows the BIOS version number and date information.
BIOS Info
Displays computer service tag number for support purposes.
Service Tag
Identifies whether the computer's processor supports Hyper-Threading and lists the processor type,
CPU Info
processor bus speed, processor ID, clock speed, and L2 cache.
Indicates amount of installed memory, memory speed, channel mode (dual or single), and type of
Memory Info
memory installed.
Standard CMOS Features
Displays current date and time settings. Date (mm:dd:yy)
Date/Time
Displays the SATA drives integrated in the system (SATA -0; SATA-1; SATA-2; SATA-3; SATA-4;
SATA Info
SATA-5).
AHCI by default
SATA Mode
All Error; All; But Keyboard. (All, But Keyboard by default)
Halt On
Advanced BIOS Features
CPU Feature
SpeedStep—Enabled; Disabled (Enabled by default)
Execute Disable Bit—Enabled; Disabled (Enabled by default)
Hyper-Threading—Enabled; Disabled (Enabled by default)
Core Multi-Processing—Enabled; Disabled (Enabled by default)
Intel(R) C-STATE tech—Enabled; Disabled (Enabled by default)
Option Field — This field contains
information about each option. In this field
you can view your current settings and make
changes to your settings.
Use the right and left arrow keys to highlight
an option. Press <Enter> to make that
selection active.
Key Functions — This field appears below the
Option Field and lists keys and their
functions within the active system setup
program field.