Replacing The Computer Cover - Dell Vostro 220s Service Manual

3 front of computer, bezel
4. Release the computer cover by grasping the handle while sliding the cover away from the front of the computer and
lifting it up.

Replacing the Computer Cover

1. Ensure that all cables are connected and folded out of the way.
2. Ensure that no tools or extra parts are left inside the computer.
3. Ensure that the bezel is attached to the front of the computer (see
NOTE: The bezel must be installed before the cover is installed.
4. Holding the cover at a slight angle, slide it toward the front of the computer until the metal clips inside the cover grip
and attach securely to the chassis frame beside the front bezel.
5. Ensure that the cover is seated and aligned correctly.
6. Replace and tighten the two thumbscrews that secure the computer cover.
7. Follow the procedure in
Back to Contents Page
After Working on Your Computer.
Replacing the Bezel).