Option Settings; Boot Sequence - Dell Vostro 220s Service Manual

Off; On (On by default)
Boot Up NumLock
Status
Enabled; Disabled (Enabled by default)
Quiet Boot
Boot Configuration
Used to set the device priority of hard drives. The items displayed are dynamically updated according
Hard Disk Boot
Priority
to the hard drives detected.
Used to set the device priority of removable devices such a media card readers. The items displayed
Removable Drives
Boot Priority
are dynamically updated according to the removable devices connected.
First Boot Device Removable; Hard Disk; CDROM; USB-CDROM; Legacy LAN; Disabled (Removable by default)
Removable; Hard Disk; CDROM; USB-CDROM; Legacy LAN; Disabled (Hard disk by default)
Second Boot
Device
Third Boot Device Removable; Hard Disk; CDROM; USB-CDROM; Legacy LAN; Disabled (CD-ROM by default)
Enabled; Disabled (Disabled by default)
Boot Menu
Security
Advanced Chipset Features
Onboard, PCI, PCI-Express (PCI-Express by default)
Init Display
First
Integrated Peripherals
USB Controller Enabled or Disabled (Enabled by default)
Enabled or Disabled (Enabled by default)
Onboard Audio
Connector
Onboard LAN Enabled or Disabled (Enabled by default)
Connector
Enabled or Disabled (Disabled by default)
Onboard LAN Boot
ROM
OFF, COM 1, AUTO, COM 3 (AUTO by default)
Serial Port
Power Management Setup
ACPI Suspend Type S1(POS); S3(STR) (S3(STR) by default)
AC Recovery Power Off, Power On, Last State (Power Off by default)
Remote Wake Up Enabled; Disabled (Enabled by default)
Auto Power On Enabled; Disabled (Disabled by default)
Auto Power On Date 0
Auto Power On Time 0:00:00
Load Defaults
Load Optimal Resets CMOS defaults to factory install values.
Defaults

Boot Sequence

This feature allows you to change the boot sequence for devices.

Option Settings

Diskette Drive — The computer attempts to boot from a floppy drive (if installed). If the floppy disk in the drive is not
bootable, if no floppy disk is in the drive, or if there is no floppy drive installed in the computer, the computer
generates an error message.
Hard Drive — The computer attempts to boot from the primary hard drive. If no operating system is on the drive, the
computer generates an error message.