Dell Vostro 220s Service Manual page 48

1 3.5-inch front-panel insert
10. For the Vostro 220s, push the release latch down to resecure the optical drive.
11. Install the cover for the empty bay onto the bezel:
a. From the inside of the bezel, while holding the cover at an angle, insert the tab on one end of the cover into the
slot on the corresponding end of the bezel opening.
b. Lower the cover until it fits securely in the bezel opening.
1 tab
3 cover for empty bay
12. Replace the bezel (see
13. Follow the procedure in
14. Enter the system setup program (see
2 inside of bezel
4 slot in bezel opening
Replacing the Bezel).
After Working on Your Computer.
System Setup Program for instructions) and update the drive settings.