Table of Contents
Advertisement
Loop Key
To cancel a CO Line Queue Call Back Request:
1.
Dial the CO Line Queue Cancel code [626] on the dial pad.
2.
Replace the handset, or press the ON/OFF button.
Loop Key
A station not having a direct appearance for a CO line will receive
incoming CO calls and transferred CO calls under the LOOP button.
Only one call at a time can be connected to a keyset on the LOOP
button.
To make a Loop button:
1.
Press SPEED + SPEED.
2.
Press the desired flexible button.
3.
Dial [89], then press HOLD.
Mailbox Buttons
To program a station's mailbox on a flexible button:
1.
Press SPEED + SPEED.
2.
Press the desired flexible button to be programmed.
3.
Dial the mailbox feature access code (460-467 = VM Grp 1-8).
4.
Dial the VMID number. A confirmation tone will sound. If an
error is made during entry, an error tone will sound.
Example ... 4606037 represents a voice mail button
(group 1) for VMID 6037 that is in the system with the
centralized voice mail installed.
To use a mailbox button:
The called station presses the MAILBOX flexible button and
goes on-hook. The internal or external call is then transferred
to the VM port by the telephone system.
STSe Station User Guide
59
August 2005
Advertisement
Table of Contents
