Table of Contents
Advertisement
28
SINGLE LINE TELEPHONE
To park a call:
1.
Press FLASH, the caller is put on Exclusive Hold.
2.
Dial parking location (424-437); confirmation will sound.
3.
If busy, press FLASH + FLASH and dial another park
location.
To retrieve a parked call:
1.
Lift the handset and press the [#] button.
2.
Dial parking location (424-437) where call was parked.
Call Pickup
A station can pickup a call ringing to any specific unattended
station by using the Directed Call Pickup procedure.
A station can pickup a call ringing to an unattended station within
the same UCD group by using the Group Call Pickup Procedure.
Directed Call Pickup
To create a Pickup Button:
1.
Press SPEED + SPEED.
2.
Press the desired flexible button, then dial #0.
To use Directed Call Pickup:
1.
Dial the station number of the known ringing telephone.
Receive ringback tone or call announce tone depending on
the intercom selector switch setting.
2.
Press the preprogrammed PICKUP button to answer the call.
STSe Station User Guide
Call Pickup
August 2005
Advertisement
Table of Contents
