Table of Contents
Advertisement
22
SINGLE LINE TELEPHONE
The SLT operation uses the same procedures as the Digital
Telephone, except there is no FWD button or Soft Keys. You
must use feature codes 640 and 662.
Call Forward - External (Off-Net)
Stations are allowed to forward intercom and transferred CO line
calls to an off-net location. The Call Forward Off-Net feature allows
a station to reroute calls that would normally be lost. Calls can be
forwarded to home or another off-net site. Initially ringing CO calls
cannot be forwarded with this feature.
To activate Off-Net Call Forwarding:
1.
Lift the handset, or press the ON/OFF button.
2.
Press the FWD button, or dial [640].
3.
Dial [ ] on the dial pad, then enter the speed bin number
(9000-9019 or 9020-9099) that contains the number where
calls are to be forwarded. A confirmation tone will sound,
and the FWD button LED is flashing.
4.
Replace the handset, or press the ON/OFF button.
To remove Off-Net Call Forwarding:
1.
Lift the handset, or press the ON/OFF button.
2.
Press the FWD button or dial either [640] or [662]. A
confirmation tone sounds and the FWD LED extinguishes.
SINGLE LINE TELEPHONE
The SLT operation uses the same procedures as the Digital
Telephone, except there is no FWD button. The user must
enter the 640 feature code to activate and 662 to clear.
STSe Station User Guide
Call Forward
August 2005
Advertisement
Table of Contents
