Loop Key; Mailbox Buttons - Vodavi Starplus STSe User Manual

60
To cancel a CO Line Queue Call Back Request:
1. Dial the CO Line Queue Cancel code [626] on the dial pad.
2. Replace the handset, or press the ON/OFF button.

Loop Key

A station not having a direct appearance for a CO line will receive
incoming CO calls and transferred CO calls under the LOOP button.
Only one call at a time can be connected to a keyset on the LOOP
button.
To make a Loop button (if allowed in admin programming):
1. Press SPEED + SPEED.
2. Press the desired flexible button.
3. Dial [89], then press HOLD.

Mailbox Buttons

To program a station's mailbox on a flexible button:
1. Press SPEED + SPEED.
2. Press the desired flexible button to be programmed.
3. Dial the mailbox feature access code (460-467 = VM Grp 1-8).
4. Dial the VMID number. A confirmation tone will sound. If an
error is made during entry, an error tone will sound.
Example ... 4606037 represents a voice mail button
(group 1) for VMID 6037 that is in the system with the
centralized voice mail installed.
To use a mailbox button:
The called station presses the MAILBOX flexible button and
goes on-hook. The internal or external call is then transferred
to the VM port by the telephone system.
STSe Station User Guide
Loop Key
August 2008