Environmental And Power Requirements; Table 2.3 Environmental And Power Requirements - Fujitsu MCM3064AP Product Manual

Specifications

2.1.3 Environmental and power requirements

Table 2.3 lists the environmental and power requirements.
Table 2.3 Environmental and power requirements (1 of 2)
Item
Power Average
requirements
Power Ready
consumption Random seek, read or write
(Average) Power save
mode
Outer With panel
dimensions
(W D H) Without panel
K K
Weight
Environmental Operating
requirements
Idle
Transport
Installation Tilt angle
2-4
+5 VDC±5% 1.2 A (2.7 A max) (*1)
Ripple requirement 100mV pp (DC-1 MHz)
3.9 W (typ) (*2)
5.8 W (typ) (*2)
Pre-idle mode 3.9 W (typ) (*2)
Idle mode 2.0 W (typ) (*2)
Standby mode 1.2 W (typ) (*2)
Sleep mode 1.2 W (typ) (*2)
101.6 1 50.0
K
101.6 1 48.4
K
410 g (with panel)
Temperature: 5 to 45°C (gradient 15°C /h or less)
Relative humidity: 10 to 85% (No condensation)
Maximum wet bulb temperature: 29°C or lower
Temperature: 0 to 50°C
Relative humidity: 10 to 85% (No condensation)
Maximum wet bulb temperature: 36°C or lower
Temperature: –40 to 60°C (24 hours or less)
Temperature: –20 to 60°C (24 hours or more)
Relative humidity: 5 to 90% (No condensation)
Maximum wet bulb temperature: 41°C or lower
–5° to +10° (*3)
Specification
2 5.4 mm
K
2 5.4 mm
K
(*3)
C156-E227-01EN