Format Unit Command; Table 4.39 Format Unit Command; Table 4.40 Format Unit Parameter List; Table 4.41 Defect List Header - Fujitsu MCM3064AP Product Manual

4.6.3 FORMAT UNIT command

Bit 7
Byte
0
1 Logical Unit Number
2
3-4
5-11
The FORMAT UNIT command formats media physically on the basis of the
specified parameter values.
When the FmtData bit is 1, the FORMAT UNIT parameter list must be
transferred. Defect List Format is ignored.
When the FmtData bit is 0, the ODD does not transfer the FORMAT UNIT
parameter list and formats media using the internal default values instead.
The CmpList is ignored.
The interleaving is set to the internal default value even if a value is specified.
Bit 7
Byte
0-3
Bit 7
Byte
0
1 Reserved
2
When the DCRT (Disable Certification) bit is 1, the ODD formats media without
checking it.
C156-E227-01EN

Table 4.39 FORMAT UNIT command

6 5
Operation Code (04h)
FmtData

Table 4.40 FORMAT UNIT parameter list

6 5
Defect List Header

Table 4.41 Defect list header

6 5
DCRT
Defect List Length
4 3 2
CmpList
Reserved
Interleave
Reserved
4 3 2
4 3 2
Reserved
Reserved
4.6 Packet Commands
1 0
Defect List Format
1 0
1 0
Reserved
IMMED
4-45