Table 4.116 Code-Id - Fujitsu MCM3064AP Product Manual

Downloading procedure
Example 1: When a 78,040h-byte download file is transferred at one time
Step 1: Transfer the 78,040h-byte download file to the device by issuing the
Example 2: When a 78,040h-byte download file is transferred in units having a
Step 1: Transfer data stored from 0h until 3Fh in the download file to the device
Step 2: Transfer data stored from 40h until 803Fh in the download file to the
Step 3: Transfer data stored from 8,040h to 1,003Fh in the download file to the
Step 4: Transfer the remaining data in the download file by issuing the command
Step 5: Issue the command with 0h specified as Allocation Length, 0h as Buffer
C156-E227-01EN

Table 4.116 Code-ID

Code-ID Micro-code type
0h Main Code
1h-Fh Reserved
command with 78,040h specified as Allocation Length, 0h as Buffer
Offset, 5 as Mode, and 0 as TNFY. Make sure that the command ends
normally.
maximum size of 32 kilobytes
by issuing the command with 40h specified as Allocation Length, 0h as
Buffer Offset, 5 as Mode, and 1 as TNFY.
device by issuing the command with 8,000h specified as Allocation
Length, 40h as Buffer Offset, 5 as Mode, and 1 as TNFY.
device by issuing the command with 8,000h specified for Allocation
Length, 8,040h for Buffer Offset, 5 for Mode, and 1 for TNFY.
with the Buffer Offset value changed as described above.
Offset, 5 as Mode, and 0 as TNFY. Make sure that the command ends
normally.
4.6 Packet Commands
Data file length
78040h
-
4-83