Environmental And Power Requirements; Table 2.3 Environmental And Power Requirements (1 Of 2) - Fujitsu MCJ3230SS Product Manual

Specifications

2.1.3 Environmental and power requirements

Table 2.3 lists the environmental and power requirements.

Table 2.3 Environmental and power requirements (1 of 2)

Item
Power Average
requirements
Power Ready (active mode)
consumption
Random seek, read/ write
(Average)
Physical Format
Power save mode
Pre-idle mode
Idle mode
Standby mode
Dimensions With panel
(W×D×H)
Without panel
Weight
Environmental Operating
requirements
Non Operating
Transport
Installation Tilt angle
Vibration/ Operating
shock
Non Operating
No cartridge, power ON
Transport
2-4
Specification
+5 VDC±5%, 1.4 A (2.5 A Max.) *1
Ripple requirement 100mV P-P (DC-1 MHz)
4.8 W (typical) *2
6.5 W (typical) *2
7.3 W (typical) *2
4.0 W (typical) *2
2.0 W (typical) *2
1.0 W (typical) *2
101.6 × 150.0 × 25.4 mm
101.6 × 148.4 × 25.4 mm
480 g (with panel)
Temperature: 5 to 45°C *3
(gradient 15°C /h or less)
Relative humidity: 10 to 85% (Noncondensing)
Max. wet bulb temperature: 29°C or lower
Temperature: 0 to 50°C
Relative humidity: 10 to 85% (Noncondensing)
Max. wet bulb temperature: 36°C or lower
Temperature: -40 to 60°C (24 hours or less)
Temperature: -20 to 60°C (24 hours or more)
Relative humidity: 5 to 90% (Non condensing)
Max. wet bulb temperature: 41°C or lower
-5° to +10° *3
2
3.9 m/s (5 to 500 Hz, sine sweep)
2
1.96 m/s
(5 to 500 Hz, sine sweep AV record/play)
2
Shock 19.6 m/s (10ms, half-sine pulse)
2
9.8 m/s (5 to 500 Hz, sine sweep)
2
Shock 49 m/s (10 ms, half-sine pulse)
2
Shock 490 m/s (10 ms, half-sine pulse)
Requirement: Packing conditions specified by
Fujitsu
C156-E224-01EN