Voice Alert
"Timer Zero"
"Traffic, Traffic"
"TAS System Test
Passed"
"TAS System Test
Failed"
"Engaging Autopilot"
GDU 1400W PRIMARY FLIGHT DISPLAY & MULTI FUNCTION DISPLAY
System Message
XTALK ERROR – A flight display
crosstalk error has occurred.
PFD1 SERVICE – PFD1 needs
service. Return unit for repair.
MFD1 SERVICE – MFD1 needs
service. Return unit for repair.
PFD1 MANIFEST – PFD
1 software mismatch,
communication halted.
MFD1 MANIFEST – MFD
1 software mismatch,
communication halted.
PFD1 CONFIG – PFD1 config
error. Config service req'd.
MFD1 CONFIG – MFD1 config
error. Config service req'd.
SW MISMATCH – GDU
software version mismatch.
Xtalk is off.
190-01264-01 Rev. A
Timer countdown has expired.
Played when a Traffic Advisory (TA) is issued.
Played when the TAS system passes a pilot-initiated self test.
Played when the TAS system fails a pilot-initiated self test.
Electronic Stability and Protection (ESP) has engaged the autopilot
in LVL mode.
Comments
The MFD, PFD and GTC are not communicating with
each other. The system should be serviced.
The PFD and/or MFD self-test has detected a problem.
The system should be serviced.
The PFD and/or MFD has incorrect software installed.
The system should be serviced.
The PFD configuration settings do not match backup
configuration memory. The system should be serviced.
The MFD configuration settings do not match backup
configuration memory. The system should be serviced.
The MFD and PFD have different software versions
installed. The system should be serviced.
Garmin G2000 Cockpit Reference Guide for the Cessna Corvalis T240
Annunciations & Alerts
Description
121