Simultaneous Com Operation; Selecting A Nav Radio; Nav Radio Tuning - Garmin G2000 Cockpit Reference Manual

Nav/Com/XPDR/Audio Panel

SIMULTANEOUS COM OPERATION

1) Touch the Audio & Radios Button on the Touchscreen Controller to
display the Audio & Radios Screen.
2) Touch the Copilot Tab.
3) Touch the Sync to Pilot Button to disable/enable synchronizing the copilot
COM selections to the pilot.
4) Touch the COM1/COM2 MIC Button to select COM1/COM2 for copilot
transmissions.

SELECTING A NAV RADIO

1) Touch the Audio & Radios Button on the Touchscreen Controller to
display the Audio & Radios Screen.
2) If necessary, touch the Copilot Tab.
3) If necessary, touch the Sync to Pilot Button to disable synchronizing
selections to the pilot.
4) Touch the NAV1 or NAV2 Button on the Audio & Radios Screen to select/
deselect the radio for monitoring.

NAV RADIO TUNING

Selecting a NAV frequency using the Touchscreen Controller:
1) Touch the Audio & Radios Button on the Touchscreen Controller to
display the Audio & Radios Screen.
2) Touch the NAV1/NAV2 frequency button to select NAV1/NAV2 for tuning,
and display the NAV1/NAV2 frequency tuning screen.
3) Use the keypad to select the desired frequency.
4) Touch the Enter Button to enter the new frequency as the NAV1/NAV2
standby frequency; or touch the XFER Button to enter the new frequency as
the NAV1/NAV2 standby frequency and transfer it to the active frequency.
Or:
1) Touch the Audio & Radios Button to display the Audio & Radios Screen.
2) Touch the NAV1/NAV2 volume slider to select NAV1/NAV2 for tuning.
3) Turn the large and small right knobs to tune the frequency (Large knob
increases/decreases MHz; Small knob increases/decreases kHz).
16
Garmin G2000 Cockpit Reference Guide for the Cessna Corvalis T240
190-01264-01 Rev. A