Create A User Waypoint - Garmin G2000 Cockpit Reference Manual

Entering manual data for trip statistics calculations:
1) From the Home Screen on the Touchscreen Controller, touch Utilities >
Trip Planning.
2) Touch the Manual Entry Button to enable the manual entry data field
buttons. Note, when the manual entry mode is selected, the other eight trip
input data fields must be entered by the pilot, in addition to flight plan and
leg selection.
3) Touch an input data field button and use the keypad to select the value.
4) Touch the Enter Button to accept the value and return to the Trip Planning
Screen.
5) Repeat steps 3 and 4 for each of the data fields.

CREATE A USER WAYPOINT

1) From the Home Screen on the Touchscreen Controller, touch Waypoint
Info > Create Waypoint. The current aircraft position is the default
location of the new waypoint.
2) Touch the user waypoint name button to display the keypad.
3) Use the keypad and the Enter Button to select a user waypoint name (up
to six characters).
4) If desired, define the type and location of the waypoint in one of the
following ways:
a) Touch the Type Button to display the User Waypoint Type Window.
b) Touch the RAD/DIS Button to select the bearing/distance from a
waypoint type.
c) Touch the REF Button to display the keypad.
d) Use the keypad and the Enter Button, or the Find function, to select
the waypoint.
e) Touch the RAD Button to display the keypad.
f) Use the keypad and the Enter Button to select the radial.
g) Touch the DIS Button to display the keypad.
h) Use the keypad and the Enter Button to select the distance.
Or:
190-01264-01 Rev. A Garmin G2000 Cockpit Reference Guide for the Cessna Corvalis T240
Flight Planning
45