Garmin G2000 Cockpit Reference Manual page 34

Nav/Com/XPDR/Audio Panel
4) Turn the large and small right knobs to tune the frequency (Large knob
increases/decreases kHz; Small knob selects .5 kHz).
5) Press the small right knob to enter the new frequency as the ADF standby
frequency; or press and hold the small right knob to transfer the new
standby frequency to the active frequency.
Finding and selecting an ADF frequency:
1) Touch the Audio & Radios Button on the Touchscreen Controller to
display the Audio & Radios Screen.
2) Scroll the list to find the ADF.
3) Touch the ADF control button to display the ADF Mode/Tuning Screen.
4) Touch the Find Button.
5) Touch the tab for the desired type of frequency (Recent, Nearest, Dest,
Flight Plan, or Favorite).
6) Scroll the list to find the desired frequency.
7) Touch the frequency button to enter the new frequency as the ADF standby
frequency.
Selecting an ADF receiver mode:
1) Touch the Audio & Radios Button on the Touchscreen Controller to
display the Audio & Radios Screen.
2) Scroll the list to find the ADF.
3) Touch the ADF control button to display the ADF Mode/Tuning Screen.
4) Touch the ANT, ADF, ADF/BFO, or ANT/BFO Button to select the ADF
mode.
Transferring the active and standby ADF frequencies:
1) Touch the Audio & Radios Button on the Touchscreen Controller to
display the Audio & Radios Screen.
2) Scroll the list to find the ADF.
3) Touch the ADF control button.
4) Touch the XFER Button
Or
1) Touch the Audio & Radios Button on the Touchscreen Controller to
display the Audio & Radios Screen.
18
Garmin G2000 Cockpit Reference Guide for the Cessna Corvalis T240
190-01264-01 Rev. A