Garmin G2000 Cockpit Reference Manual page 84

Hazard Avoidance
Selecting an obstacle display range on the navigation map:
1) From the Home Screen, touch Map > Map Settings.
2) If necessary, touch the Land Tab.
3) Touch the Obstacle Data Button to enable/disable the Obstacle Data.
Obstacle Data is enabled when the button annunciator is green, disabled
when gray.
4) Touch the current range button (10 NM is selected by default) to display
the Map Obstacle Range.
5) Scroll through the list and touch a range button to select the maximum
map range at which the system shows obstacle data.
Profile View
The system provides a Profile View of wind, terrain, and obstacles relative to the
aircraft' s current flight path and altitude on the Navigation Map Pane. Profile View
does not provide terrain or obstacle caution or warning annunciations or voice alerts,
nor does it display potential impact points inside the Profile View.
Enabling/Disabling Profile View Inset Window:
NOTE: The Profile View Inset Window cannot be shown with the Flight Plan
Text Inset Window in the same display pane. Selecting either window will
remove the other.
1) From the Home Screen, touch Map > Map Settings.
2) If necessary, touch the Inset Window Tab.
3) Touch the Profile View Button to enable/disable the Profile View Inset
Window. Profile View is enabled when the button annunciator is green,
disabled when gray.
Customizing the traffic display on the navigation map:
1) From the Home Screen, touch Map > Map Settings.
2) If necessary, touch the Sensor Tab.
3) Touch the Traffic Button to enable/disable the display of traffic. Traffic is
enabled when the button annunciator is green, disabled when gray.
4) Touch the Traffic Settings Button to select which traffic symbols are to be
shown:
68
Garmin G2000 Cockpit Reference Guide for the Cessna Corvalis T240
190-01264-01 Rev. A