Displaying Selected Altitude In Meters; Setting The Baro Transition Alert; Change Navigation Sources; Changing The Selected Gps Cdi Setting - Garmin G2000 Cockpit Reference Manual

Flight Instruments

DISPLAYING SELECTED ALTITUDE IN METERS

1) Press the PFD Settings Softkey on the PFD to display the second-level
softkeys.
2) Press the Other PFD Settings Softkey.
3) Press the Altitude Units Softkey.
4) Press the Meters Softkey to turn on metric altitude readouts.
5) Press the Back Softkey to return to the previous level of softkeys.

SETTING THE BARO TRANSITION ALERT

1) From the Home Screen on the Touchscreen Controller, touch Utilities >
Setup > Avionics Settings.
2) Touch the Alerts Tab.
• To turn the alert on or off, touch the Baro Transition Alert Enable
Button. An illuminated green line below "Enable" indicates that the alert is
on.
• To set or change the Baro Transition Alert Altitude, touch the Baro
Transition Alert Data Field. Enter the desired altitude on the keypad, and
touch Enter.

CHANGE NAVIGATION SOURCES

1) Press the Active Nav Softkey on the PFD to change from FMS to VOR1 or
LOC1.
2) Press the Active Nav Softkey again to change from VOR1 or LOC1 to
VOR2 or LOC2.
3) Press the Active Nav Softkey a third time to return to FMS.

CHANGING THE SELECTED GPS CDI SETTING

1) From the Home Screen on the Touchscreen Controller, touch Utilities >
Setup > Avionics Settings.
2) Touch the System Tab.
3) Touch the GPS CDI Data Field.
4) Touch desired setting (2.00 NM, 1.00 NM, 0.30 NM, or AUTO).
2
Garmin G2000 Cockpit Reference Guide for the Cessna Corvalis T240
190-01264-01 Rev. A