Changing Com Frequency Channel Spacing - Garmin G2000 Cockpit Reference Manual

Or:
1) Press the small right knob to select the COM desired for tuning (selected
standby frequency is light blue).
2) Turn the large and small right knobs to tune the frequency (Large knob
increases/decreases MHz; Small knob increases/decreases kHz).
3) Press the small right knob to enter the new frequency as the standby
frequency; or press and hold the small right knob to transfer the new
standby frequency to the active frequency.
Selecting a COM frequency using the PFD Controller:
1) On the PFD Controller, press the COM/NAV Button to display the COM/
NAV Window on the PFD.
2) Turn the large PFD Knob to move the cursor to the SOURCE field.
3) Turn either PFD Knob to select the desired COM.
4) Press the ENT Key or the small PFD Knob to accept the selection and move
the cursor to the STBY frequency field.
5) Turn the small PFD Knob one click to activate the editing cursor (flashing).
6) Turn the large and small PFD knobs to select the frequency (Large knob
increases/decreases MHz; Small knob increases/decreases kHz)
7) Press the ENT Key or the small PFD Knob to accept the selection and move
the cursor to the XFER? field.
8) Press the ENT Key or the small PFD Knob to accept the new frequency
as the COM1/COM2 active frequency and transfer the previously active
frequency to the standby frequency.

CHANGING COM FREQUENCY CHANNEL SPACING

Changing COM frequency channel spacing:
1) From the Home Screen on the Touchscreen Controller , touch Utilities >
Setup > Avionics Settings.
2) Touch the Systems Tab (if necessary). Scroll the list to show the COM
Channel Spacing button.
3) Touch the COM Channel Spacing button to display the choice of 25.0 kHz
or 8.33 kHz.
190-01264-01 Rev. A Garmin G2000 Cockpit Reference Guide for the Cessna Corvalis T240
Nav/Com/XPDR/Audio Panel
15