Frymaster 14 Series Operator's Manual page 55

4.13.6 FILTER TIME
The FLTR time option is used to set the amount of time which passes before the filtration
prompt is displayed. This option is useful in lower volume stores, where filtration is desired more
often than the amount the cook cycles would generate.
1. Perform steps 1-3 on page 4-32.
Scroll to FLTR TIME.
2. With FLTR TIME displayed, press the
179).
The computer displays fltr time on the left and :00 on the right.
3. Use the number keys from 0 to 9 to enter the amount of
time between filter prompts (ex. after every 2:00 hours
enter as 200) (see Figure 180).
The computer displays fltr time on the left and 2:00 on the right.
4. With the desired selection displayed, press the u (INFO) button (see Figure
181).
(2) button (see Figure 182) to exit.
5. Press the
The computer displays OFF.
(1 yes) button (see Figure
4-37
Figure 179
Figure 180
Figure 181
Figure 182