Frymaster 14 Series Operator's Manual page 38

4.10.4.4 Refilling the Vat from Bulk Oil Systems after Disposal
The computer displays fill pot from bulk.
The bulk oil refill pump uses a momentary switch. It only pumps when the switch is depressed.
1. Press and hold the
reaches the fill line (see Figure 76).
2. With the vat full, release the
(2) button, when the vat is full, to close the fill valve (see Figure 77).
3. Press the
The computer displays off.
4.11 Filter Menu
The filter menu selections are used for filtering, draining, filling and disposing.
4.11.1 Accessing the Filter Menu
1. Press and hold the filter button for the selected vat for three seconds (see
Figure 78).
Computer displays filter menu for three seconds, changing to Auto Filter.
2. Press the t and u buttons (see Figure 79) to scroll between:
a. auto filter
b. maint filter
c. dispose
d. drain to pan
e. fill pot from DRAIN pan
f. fill pot from bulk
The first two menu items: AUTO FILTER and MANTAINENCE (MANUAL) FILTER are covered
in Chapter 5. The other menu items are covered on the following pages.
The DRAIN TO PAN and FILL POT FROM DRAIN PAN functions are used primarily for
diagnostic purposes. They are used when oil is to be drained to the pan or returned to the frypot.
(1 yes) button to refill the vat until the oil
(1 yes) button.
See pg. 5-2
See pg. 5-8
See pg. 4-16
See pg. 4-21
See pg. 4-22
See pg. 4-22
4-20
Figure 76 Figure 77
Figure 78
Figure 79