Frymaster 14 Series Operator's Manual page 48

22. Bulk or JIB System: Remove solution following Kay Chemical instructions. Remove the filter
pan and remove crumb basket, hold-down ring, filter media and screen. Replace empty filter pan
in fryer.
23. Bulk or JIB System: The computer displays Vat empty alternating
with yes no.
Figure 137).
24. Bulk or JIB System: The computer displays SCRUB COMPLETE,
alternating with yes no. Press the
25. Bulk or JIB System: The computer displays DISPOSING. The drain opens to drain the small
amount of residual solution left in the vat. Rinse excess solution from vat.
26. Bulk or JIB System: The computer displays Rinse complete,
alternating with yes no. Press the
to continue when the vat is completely rinsed.
27. Bulk or JIB System: The computer displays VAT and pan DRY, alternating with yes
no. Ensure the vat and pan are completely dry.
28. Bulk or JIB System: Press the
continue when the vat and filter pan are dry.
29. Bulk or JIB System: The drain valve closes and the computer displays
LEVEL 1 PROGRAM. Press the
and to return to OFF.
4.12.4 HIGH-LIMIT TEST MODE
The high-limit test mode is used to test high-limit test one at 410°F (210°C) and the physical high-
limit test with high-limit test two. Shut the fryer off and call for service immediately if the
temperature reaches 460°F (238°C) without the second high-limit tripping and the computer displays
hi-2 BAD with an alert tone during testing. The high-limit test will destroy the oil. It should only
be performed with old oil.
The test is cancelled at any time by turning the fryer off. When the fryer is turned back on, it returns
to the operating mode and displays the product.
1. Perform steps 1-3 on page 4-24.
Computer displays high limit test.
(1 yes) button to continue the high-limit test (see Figure 142).
2. Press the
The computer displays hi-limit alternating with yes no.
(1 yes) button to continue the test (see Figure 143).
3. Press the
With the vat empty, press the
(1 yes) button (see Figure 138).
(1 yes) button (see Figure 139)
(1 yes) button (see Figure 140) to
(2) button (see Figure 141) to quit
(1 yes) button (see
4-30
Figure 137
Figure 138
Figure 139
Figure 140
Figure 141
Figure 142
Figure 143