Frymaster 14 Series Operator's Manual page 33

The computer displays ASSIGN BTN on the left and the
chosen product on the right.
To assign the entered product to a button, follow instructions
below.
22. With the chosen product displayed on the right, and ASSIGN BUTTON on the left, press and
hold for three seconds a button between 1-0 to assign the product. The LED in the chosen
product button will illuminate (see Figure 47). To unassign a product from a button, press and
hold the button assigned to that product for three seconds. The LED no longer illuminates.
23. Once the button is assigned, press the u (INFO) button (see Figure 48)
to save the assigned button.
The computer displays name on the left with the product (ex. WINGS)
on the right.
* Note: If additional programming, to add other products, is necessary
necessary press the
4
button (see Figure 49) and return to step 4.
24. If no further programming is necessary, press the
Figure 50). The computer displays the select product option
with the product (ex. FR FRIEs) on the right screen. Press the
button again (see Figure 50). Computer displays Level 1
program changing to the Product selection prompt.
(2) button (see Figure 51) to quit and to return to OFF.
25. Press the
4.10.3 Storing Menu Items in Product Buttons
This function is used to store individual menu items to product buttons for one or two button
cooking.
To store menu items to a specific button:
1. Perform steps 1-6 on pages 4-12 thru 4-13.
2. The computer displays name on the left and the selected product (ex. wings) on the right.
3. Press the t button (see Figure 52) to scroll to the ASSIGN BTN option
used to assign a menu item to a specific product button.
4. The computer displays assign btn on the left and wings on the
right.
(2) button (see Figure 50) once and then the
4-15
Figure 47
(2) button (see
(2)
Figure 48
Figure 49
Figure 50
Figure 51
Figure 52